» » » » Hard Disk Sentinel Pro 5.20.9372
Hard Disk Sentinel Pro 5.20.9372
Хорошая программа для мониторинга состояния жёстких дисков. Сейчас как никогда важна информация, хранящаяся на них. Сам неоднократно сталкивался со случаями, когда пользователи не делали резервных копий важных файлов, а потом сильно расстраивались из-за их потери. Сами подумайте - работа, семейный архив фото/видео, а также другая информация, которая представляет ценность, может вмиг исчезнуть. За восстановление нынче берут большие деньги, поэтому лучше предупреждать подобные ситуации - хранить копии на других устройствах и в облачных сервисах. Hard Disk Sentinel покажет здоровье ваших дисков и подскажет, стоит ли заменить какие-либо из них. Имеется планировщик, отчёты, различные тесты. Сохраните ваши файлы сегодня.

Общая информация:

Тип: установка, распаковка portable
Языки: русский, english, multi
Активация: [patch-MPT, addhaloka mod]
Вырезано: справка
Дополнительно: импорт HDSentinel.ini

Параметры командной строки:

Тихая установка: /S /I
Распаковка portable: /S /P
Выбор места установки: /D=ПУТЬ

Параметр /D=PATH следует указывать самым последним
Например: Hard.Disk.Sentinel.Pro.v5.01.6.8557.exe /S /I /D=C:\MyProgram

Поддерживаемые операционные системы:

Windows XP SP3 Windows 7 SP1 32-bit Windows 7 SP1 64-bit Windows 8.1 32-bit Windows 8.1 64-bit Windows 10 32-bit Windows 10 64-bit

Что нового: официальный сайт
Что нового (бета): официальный сайт

Hard Disk Sentinel 5.20 (23/3/2018)
Improvements and new features:
  • added option to monitor NAS boxes, hard disks used with Network Attached Storage devices
    (see How to: monitor Network Attached Storage (NAS) status )
  • added Configuration -> Advanced Options -> Monitor Windows Event Log for problems related to disks and storage subsystem. By this option, Hard Disk Sentinel Pro detects if Windows saves errors/warnings to SYSTEM event log and report recent problems detected while Hard Disk Sentinel is running/monitoring and use them in calculation of health to show issues, degradations (registered Pro version)
  • display if Configuration -> Disk Control -> Disable detection of USB and SCSI drives checked and blocking detection
  • added SSD features (Read Zeroes After Trim) and security features (Sanitize, Overwrite, Crypto scramble, Block erase etc.) to Information page and reports
  • detection and reporting new ATA standards and new ATA / Serial ATA features on Information page: Device sleep (DevSleep), Service interrupt, Device encrypts all data, IDLE IMMEDIATE, Nominal form factor, NCQ Streaming and autosense, Rebuild assist, Hybrid information
  • display TRIM status in addition to complete health / temperature / status for NVMe / M.2 SSDs
  • displaying custom configured temperature thresholds on Temperature page
  • displaying lifetime writes of hard disks on main overview page (if supported, for example new Seagate and WD Black drives)
  • improved WRITE testing (Surface test -> Write test, Write+Read, Reinitialise disk surface) to prevent "access denied" error
  • updated Help to cover new functions, features
  • completely redesigned tray icon handling: better sort/move/order tray icons under Windows 7, 8.1, 10
  • improved disk surface test performance with Intel, LSI, Dell SAS RAID controllers and SAS HBAs
  • improved disk surface test performance with hard disks formatted with 520 / 528 bytes/sector
  • improved text description on various errors/problems
Improved hardware support:
  • detection of NVMe SSD status when Intel RAID configured: detect complete status of standalone NVMe SSDs and NVMe SSDs used as RAID.
    displaying Highest possible transfer rate and Negotiated transfer rate for NVMe SSDs
  • added support of integrated AMD RAID controller on motherboards with Ryzen CPUs: detection complete hard disk / SSD information, health, temperature, self-monitoring data of SATA drives managed in RAID configurations
  • added support for ATTO RAID Rxxx controllers: detection complete hard disk / SSD information, health, temperature, self-monitoring data of SATA drives managed in RAID configurations. Detect SAS drives, their status and error counters when RAID configuration used
    displaying RAID controller temperature for ATTO RAID controllers
  • added detection of complete disk status when ASMEDIA ASM1352R external USB RAID controller used: detection of complete status when RAID 0 / RAID 1 / LARGE / JBOD confiuration used
  • added support of RaidSonic ICY BOX IB-RD2253-U31, Oyen Digital Minipro RAID USB 3.1 enclosure
  • added support of Intel(R) Integrated RAID Module RMT3PB080: detection complete hard disk / SSD information, health, temperature, self-monitoring data of SATA/SAS drives managed in RAID configurations.
  • added support of ASMEDIA ASM109x RAID controllers with proper firmware: detection complete hard disk / SSD information, health, temperature, self-monitoring data of SATA drives managed in RAID0, RAID1, SPAN/large configurations
  • improved detection of Intel onboard RAID controller and drive status (previously some RAID disks could be missing, especially with multiple arrays and newer Intel RST drivers)
  • improved industrial SD card detection, added support of industrial SD cards with newer firmware versions
  • added support of Western Digital WD SSDs
  • improved detection of FASTDISK SSD
  • fixed health of Sandisk SSD PLUS 256 GB external SSD
  • improved support and reporting of SK Hynix SSDs (including SK Hynix SC311)
  • added support of Silicon Motion SM2258, SM2259 controllers
  • added support of Silicon Motion SM2260 NVMe SSDs
  • added support of ADATA SU800 SSD
  • added support of KingDian SSD, Kingspec SSD, newer Kingston SSD, Patriot Blast and further SSDs
  • improved NVMe SSD status detection under Windows 7, Windows 8.1 32 bit, added support of Plextor M8PeY NVMe SSD
  • improved error reporting with Marvell 9230 RAID controllers
  • improved detection time and compatibility with JMicron external enclosures
  • improved detection with HP Smart Array P812 RAID controller
  • improved detection of LSI / DELL RAID controllers when RAID 50 used
  • improved detection of disk status information with newer HP Smart Array controllers, drivers and HP servers
  • improved compatibility with Sandisk X300, Corsair Force LE, Micron SSDs
  • improved compatibility with LSI / Avago / Broadcom SAS controllers, displaying SLOT number in Disk Interface field
  • improved compatibility and error reporting for LiteON SSDs
  • improved power on time count display of Toshiba hard disk drives
  • improved compatibility with 4Kn (native 4K sector size) Enterprise hard disk drives
  • improved compatibility with Marvell 91xx, 92xx controllers in standalone and RAID mode
  • improved compatibility with LSI MegaRAID 8208 controller
  • improved support of new Intel SSDs
  • improved compatibility with some pendrives, memory card readers
  • improved support of HP SAS SSDs, STEC SAS SSDs
  • improved lifetime writes of various Samsung and Sandisk SSDs
Bug fixes, further modifications:
  • fixed: large external hard disks could be locked (was not possible to use safe remove)
  • improved WMI support: no unwanted events in WMI activity log
  • option to keep last NN archives during backup: increased to keep up to 1000 archives
  • fixed: FTP projects did not clear old archives if "keep last N archives" option used
  • fixed problem when disk(s) selected to be displayed when they are offline and their data files removed
  • fixed: log of issued alerts not saved with Backup Configuration
  • updated language files (thanks for translators)
  • minor interface and tray icon changes
  • fixed 64-bit world wide ID field

Здесь находятся ссылки на быстрые и бесплатные файлообменники, но они доступны только зарегистрированным пользователям :)
repack portable диски hdd жёсткий диск информация восстановление информации
Что-то не работает? Ругается антивирус? Слетела активация? Ознакомьтесь!
Информация
Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.

Репаки от Кролика / RePacks by KpoJIuK